Unnaturally colored exhaust smoke can cause concern even the most composed vehicle owner.…
Ceramizer – what is it and what is it for?
Ceramizer is a preparation that allows you to regenerate the inside of the engine without having to disassemble it. Its use is recommended every time the engine oil is changed, which will extend the life of the engine. Importantly, Ceramizer can be used for both naturally aspirated and turbocharged engines.
From this article you will learn:
- what is ceramizer?
- how to use ceramizer?
- when is it worth using ceramizer?
- what can replace ceramizer?
See also the article: Particulate filter – what is it and what is it for? Important information about DPF, GPF and FAP
What is ceramizer?
Ceramizer As mentioned in the introduction, it is a preparation that regenerates the inside of the engine without having to disassemble it. It is worth being aware that during operation of an internal combustion engine, friction occurs between the pistons and the cylinder walls. Theoretically, this should be prevented if properly selected engine oil, but it is worth being aware that even the best will not be able to reduce this phenomenon one hundred percent. As a result, micro-damages and pits appear on the cylinder walls, which may become larger over time. This means that used cars often lose compression in the cylinders and therefore start burning oil.
The solution to this problem is precisely this ceramizer for the engine, a chemical agent that protects metal surfaces and regenerates micro-cracks formed during the operation of the drive unit. According to the manufacturers' opinions, the use of Ceramizer allows to increase the compression pressure, and as a result, the durability and power of the engine. Moreover, it also reduces fuel and oil consumption, as well as noise and vibrations accompanying the running engine. What is important in this case is that Ceramizer is a preparation that can be used for both diesel, gasoline and LPG engines. These can be not only naturally aspirated units, but also turbocharged ones.
How to use ceramizer?
Knowing what ceramizer is, it is also worth knowing how to use it. Many people are looking for information on this topic, which can be confirmed by the popularity of Internet searches for the phrase: ceramizer how to use. It is therefore important to top up oil ceramizer engine. How to do it? Well, remember to apply Ceramizer on a warm engine, which will allow it to mix thoroughly with the engine oil. The first step is to start the engine and warm it up. Then pour Ceramizer through the engine oil filler neck in the amount recommended by the manufacturer. It is important to leave the engine running or go for a short drive after applying Ceramizer. This will ensure proper mixing of the ingredients and, consequently, activation of the beneficial properties of the preparation used.
When is it worth using Ceramizer?
When is it worth using Ceramizer? Well, according to automotive industry experts and experienced mechanics, this is an activity that everyone should do engine oil change. Ceramizer is a durable preparation that remains active for a long time. Of course, when changing the oil, it is removed, and therefore it is necessary to use the regenerating agent again. Is it worth using Ceramizer in every car? Of course it is, because, as already mentioned, even the best and regularly changed oil is not able to completely reduce the friction occurring during the operation of an internal combustion engine. As a result, its condition deteriorates over time, which is visible not only by making louder sounds, but also by burning oil or losing power. Of course, many car owners use Ceramizer only when the above-mentioned symptoms are noticed or when they begin to appear problems with starting the engine. The preparation allows you to stop the process of wearing out engine parts, and its use also enables their automatic regeneration. The benefits can be noticed even after driving the first 200 km after using Ceramizer.
What are the alternatives to Ceramizer?
Ceramizer is a preparation used by many drivers, and this fact can be confirmed by the number of searches on the Internet for the phrase: ceramizer reviews. Therefore, it is worth being aware that there are also alternative preparations, of which this may be an example engine regenerator Moje Auto Engine Dokor. It is used in exactly the same way as Ceramizer, and the advantage is that it is miscible with all types of mineral, semi-synthetic and synthetic oils. Moreover, it can also be used for differentials and gearboxes even with GL-5 class gear oils. The regenerator restores the engine's efficiency, thus extending its service life. This is possible by reducing oil consumption (and therefore reducing smoke) and sealing the piston rings, which translates into increased compression and oil pressure. As a result, Moje Auto Engine Doktor is a preparation that can be used, for example, when a delicate problem occurs engine overheating.
Does engine flush wash away Ceramizer?
Does Ceramizer have any disadvantages? Due to the fact that it allows you to regenerate the engine and extend its life without visiting a mechanic, it is difficult to find any disadvantages when entering the following phrase on the Internet: ceramizer defects. On the other hand, you should be aware that this is a preparation that stays in the engine only until the next oil change. Therefore, it is recommended to use it at every oil change. Early application may be a good solution engine flushes, because these types of agents are able to clean the drive unit from carbon deposits and other dirt. As a result, when changing the oil, you can be sure that it will be poured into a clean engine. However, the subsequent use of Ceramizer is important in this case, because according to mechanics' opinions, the rinse not only rinses out the Ceramizer, but also dilutes the oil, which may lead to the breakdown of the oil film. This is a dangerous phenomenon for the engine and can be prevented by using Ceramizer to seal the piston rings.
To sum up, it should be said that Ceramizer is a preparation that allows you to restore the efficiency of the engine, and thus significantly extend its life. Moreover, its use does not require a visit to a mechanic, which translates into relatively low costs.
