How to clean and protect windows against fogging?

Artur Owczarek

Brand Product Manager Moje AutoHe has been involved in the automotive industry for years. He is passionate about cars and detailing. On his blog, he shares his knowledge and experience, offering tips on how to effectively care for your car and extend its life.

Are you tired of using two separate products for dirty windows outside and fogged windows inside the car? Are you fed up with windows covered with deposits resulting from everyday use of your car? Are you tired of limited visibility? Check how to solve this problem!

We present two window cleaning products from the Moje Auto line: "Szyby" window cleaning foam in aerosol and "Glass cleaner” in the Moje Auto atomizer. These are universal products for cleaning car windows outside and inside, mirrors, headlights and turn signal lamps. The products quickly and effectively remove organic dirt, dust, mud and grease. They do not leave streaks and do not require long polishing.

(photo: My Car)

Reduced window fogging

The products are very helpful in the autumn and winter, when the problem of window fogging is increased. The preparations reduce the deposition of steam, which improves visibility in difficult conditions and increases driving safety - for example, during rain, especially at night. The glass cleaner in the atomizer is dosed onto a larger surface, while the foam flows slower and therefore has longer contact with the cleaned surface. Foam is an excellent solution when we want to clean the vehicle's windows from the inside, especially the windshield. The foam does not drip or flow onto the cockpit elements, doors and upholstery.

(photo: My Car)

Washing car windows – what is worth remembering?

If our car is very dirty, before washing the windows, we recommend rinsing the cleaned surface with water - this will make cleaning much easier and faster. This way we will get rid of mud and sand grains from the glass surface, which could scratch the surface being cleaned.

Washing car windows on a hot day is not the best idea because the preparation will evaporate and dry very quickly. This will result in dried droplets of the preparation remaining on the cleaned surface, which will be very difficult to remove.

To clean windows, it is worth preparing a good cloth, e.g microfiber or chamois leather, or a good-quality paper towel that will not leave any debris on the glass surface. We can also prepare protective gloves to take care of our hands. Now we can start washing the windows.

Washing car windows – in 4 steps

STEP 1: Shake the container before use so that the active ingredients contained in the product are distributed throughout its entire volume, which will allow the product to work better.

STEP 2: Apply the preparation from a distance of about 20 cm directly onto the surface to be cleaned. Maintaining this distance is extremely important because if we use the product at a distance of less than 15 cm, the pressure in the packaging may cause the preparation to splash sideways. However, if we use the product from a distance above 25 cm, the product will not be dosed precisely. While maintaining the appropriate distance, the product is applied exactly to the place we want to clean, without splashes. This also allows you to use the product sparingly.

STEP 3: We wait several seconds to give the product time to react and wet the cleaned surface.

STEP 4: Wipe and then polish the cleaned surface with a dry and clean cloth. It is important not to leave any streaks or streaks, especially on the windshield, making it difficult to drive against the sun or at night.

Now we can enjoy clean windows without streaks. The problem of fogged windows is no longer a problem, which makes driving much safer and more pleasant. We encourage you to try other products from the line My Car for cleaning and caring for glass surfaces.