Car wash brush - a controversial topic It is perceived by many as a murder weapon, its…
Anti-corrosion protection – how to protect the chassis?
(photo: pexels)
Each car has factory anti-corrosion protection. However, do not treat it as the only protection that will allow you to "definitely" avoid damage to the chassis of your vehicle. Factory protection does not completely eliminate the risk of corrosion, which should be a signal to you that you need to regularly maintain and care for your car's chassis. For this purpose, use special anti-corrosion coatings, which you can do yourself or use a professional service. In the second case, the costs will be significantly higher. So how can you save without compromising on quality? How to protect the car chassis?
Car chassis is most exposed to the destructive influence of external factors. They accelerate the corrosion process and thus affect driving comfort and the service life of individual chassis components. Sand and small stones in summer, road salt and water in winter. These are conditions that wreak real havoc on the chassis. Many drivers do not pay enough attention to those parts of the vehicle that are not visible at first glance. They only deal with the problem when the car stops working properly. Corrosion is often the cause. Prevention is better than cure, so we will help you choose effective, efficient and easy to do yourself protection against corrosion.
(My Car infographic)
Professional anti-corrosion protection of the chassis - Is that necessary?
When choosing a new car, you must be aware that you are not exempt from regular maintenance of its components. It is worth taking care of its chassis from the very beginning. Thanks to this, after years of operation, the condition of the vehicle will be much better than if you had skipped this expense. Corrosion protection can be performed in a professional workshop. The cost should not exceed several hundred zlotys. Both the floor and the closed profiles are covered with special ones anti-corrosion coatings. In order for the agent to reach the steel elements that make up the vehicle's body, in some workshops the outer parts and parts of the upholstery are dismantled.
Professional car anti-corrosion protection This is a good way to protect a new car that has not yet been affected by corrosion. It is a kind of base for the care and maintenance of the chassis on a daily basis, at home.
(My Car infographic)
Protection against corrosion in a home workshop
Car chassis you can maintain it yourself. Owners of second-hand cars should especially remember this. If you have an older car, that doesn't mean you can allow corrosion to attack its undercarriage. The entire conservation process can be divided into several stages.
Before you put it on protection against corrosion, you must thoroughly wash the chassis - engine and other components. As a result of vehicle use, oils and grease appear on its surface and are difficult to remove with an ordinary cleaning agent when they dry. You will need a preparation with targeted action. My car suggests engine cleaning preparation and car components, which perfectly copes with grease, oils and other stubborn dirt. Apply it directly to the surface to be cleaned, wait a few seconds and rinse thoroughly.
If the chassis has already been attacked by corrosion, traces of corrosion must be removed before applying the coating. We wipe off the corrosion spots to clean sheet metal. You can use a wire brush or a grinder for this purpose. A chemical rust remover and an epoxy primer will also be useful. Otherwise, if you do not remove corrosion from the surface and cover these places with a protective preparation, it will develop.
Anti-corrosion preparations
There are many preparations designed to protect the chassis against corrosion. These include: wax-based agents that dry and create protective properties in the profiles anti-corrosion coatings. Most often used by professionals. If you clean and maintain the chassis of your car yourself, choose one of the car anti-corrosion preparations that can be applied, for example, using a gun. Corrosion protection it should cover the floor, sills, beams and rockers. Do not apply it only to the exhaust, because it heats up quickly and the coating does not stay on its surface for long.
(My Car infographic)
Execution anti-corrosion protection at home, it requires prior thorough cleaning and drying of the chassis, as well as removal of any corrosion centers. Only on a clean surface can you apply a protective coating. Take care of both your new and second-hand car, check the condition of the chassis, maintain it regularly, clean the surface, remove corrosion spots and apply a new coating. Your car will drive more efficiently and longer, and you will feel safer.
How and with what to protect the chassis?
- Corrosion protection in a professional workshop for new cars, not attacked by corrosion.
- Anti-corrosion coatings at home – regular maintenance and cleaning.
- Before applying, remember to thoroughly clean the undercarriage surface.
- Remove corrosion centers.
- Apply corrosion protection.
